SOLDERLESS Wiring HARNESS 4-Way TELECASTER

!!! CAUTION !!!

This kit can only be used in conjunction with a neck pickup with separate coil and cap wire. These PU's are easy to recognize because they have three wires, 1x hot coil, 1x negative coil, 1x ground (cap), like Fender Texas Special, Di Marzio Twang King,...

Absolutely perfect for all non-soldering iron owners, and anti-hobbyists who have so far been afraid to buy such a kit!

This Solderless Prewired Kit should be installable by anyone. We simply added a pre-wired push clamp terminal for the pickups and ground connections to our standard kit. The wires of the pickups etc. are simply plugged into the prewired terminals and the complete soldering work is eliminated. Due to the clearly arranged terminal row, it is almost impossible to wire something wrong, and the exchange should be relatively quick and easy even for inexperienced hobbyists. Except for the additional wiring terminal, the kit is absolutely identical to the standard soldering kit.

With this circuit the single, parallel and serial switching of both pickups is possible. By connecting the two pickups in series, an additional fourth louder and fatter sound is created!

The prewired kit is equipped with a treble bleed mod. The treble bleed mod allows you to use the volume pot over the entire bandwidth without losing the treble.

Details:

•     ARTY's WAXED PAPER SKIN Capacitor 50's Vintage Style
•     CTS 250K or 500k Audio Taper Pot, 1/4" solid shaft, 3/8" thread
•     Oak Grigsby 4-Way Blade Switch
•     SWITCHCRAFT 1/4" Mono Audio Jack
•     Treble Bleed Mod
  
•     Cloth-covered Waxed Pushback 22 AWG Vintage Wire
•     Reinforced Ground Connection between the Potentiometers, also for easier installation
•     Stabilized insulated socket contacts
•     Easy to understand Wiring Plan

Switch assignment:

Position 1 = Bridge

Position 2 = Bridge + Neck parallel

Position 3 = Neck

Position 4 = Bridge + Neck serial

The kit is best suited for an S-S pickup assembly (S-Single Coil, H-Humbucker).

This kit is available in all possible combinations. You can choose an Oak Grigsby (NEW) or CRL Switch, 250k or 500k potentiometers, and 0.022, 0.033, 0.047, 0.100 uf capacitors. To keep the variation selection clearer, we have listed only the most common combinations. For all other combinations please select a kit with your favorite switch, and specify the desired combination during the ordering process under remarks, for example "CRL 500k 0.033uF".

Important information about the potentiometers:
The pots used are solid shaft CTS pots with 6.35 mm shaft diameter. This corresponds to the original US fender pots. For basses from Asia, Mexico and Europe, mostly 6 mm diameter split shaft pots are used, e.g. also in the Strat models. This means that the buttons may have to be slightly drilled out or replaced, but are usually possible without any problems. Each kit is also optionally available with split shaft pots of the same quality upon request (please before purchase).

The shipping costs for most EU countries are € 12,-. You can find more information about shipping costs under the link directly below the product costs (inkl. Mwst., zzgl. Versandkosten). If your destination country is not listed here, please contact us to calculate the shipping costs.

If you need help with the checkout form or payment, please don't hestitate to contact us via e-mail. We just need your address and the designation of the desired items. As soon as we have received the above information, we will send you the detailed invoice.