SOLDERLESS Wiring HARNESS HSS STRATOCASTER

Absolutely perfect for all non-soldering iron owners, and anti-hobbyists who have so far been afraid to buy such a kit!

This Solderless Prewired Kit should be installable by anyone. We simply added a pre-wired push clamp terminal for the pickups and ground connections to our standard kit. The wires of the pickups etc. are simply plugged into the prewired terminals and the complete soldering work is eliminated. Due to the clearly arranged terminal row, it is almost impossible to wire something wrong, and the exchange should be relatively quick and easy even for inexperienced hobbyists. Except for the additional wiring terminal, the kit is absolutely identical to the standard soldering kit.

Now your HSS Strat will finally sound the way it should. We have installed an Oak Grigsby super switch in this prewired Kit. This makes it possible to connect the pickups to the right potentiometers and capacitors, without the known disadvantages like too bright single coils or a muddy humbucker. The humbucker has a 500k tone pot with 0.02uf capacitor, the two single coils a 250k pot and a 0.05uf capacitor. In the 4nd position (bridge/middle) the humbucker is automatically split into a single coil. Two additional carbon resistors compensate for the 500k volume pot for the single coils. A treble bleed is also used. The treble bleed mod allows you to use the volume pot over the entire bandwidth without losing the treble. This kit works as described only in combination with a splitable humbucker.

Details:

•     ARTY's WAXED PAPER SKIN Capacitor 50's Vintage Style
•     CTS 250K and 500k Audio Taper Pot, 24 spline split shaft, 3/8" thread
•     Oak Grigsby Super Switch
•     SWITCHCRAFT 1/4" Mono Audio Jack
•     Treble Bleed Mod
  
•     Cloth-covered Waxed Pushback 22 AWG Vintage Wire
•     Reinforced Ground Connection between the Potentiometers, also for easier installation
•     Stabilized insulated socket contacts
•     Easy to understand Wiring Plan

Switch assignment:

Position 1 - Neck
Position 2 - Middle + Neck
Position 3 - Middle
Position 4- Middle + Bridge (Bridge coil split)
Position 5 - Bridge

The kit is suitable for a H (Bridge)-S-S pickup assembly (S-Single Coil, H-Humbucker). Mixing different pickup manufacturers may lead to an "out of phase" effect. This can be easy fixed by reversing the polarity of the single coils (twisting black and white).

The shipping costs for most EU countries are € 12,-. You can find more information about shipping costs under the link directly below the product costs (inkl. Mwst., zzgl. Versandkosten). If your destination country is not listed here, please contact us to calculate the shipping costs.

If you need help with the checkout form or payment, please don't hestitate to contact us via e-mail. We just need your address and the designation of the desired items. As soon as we have received the above information, we will send you the detailed invoice.