PREWIRED HARNESS Jazz Bass
J-Bass Standard Vintage pre-wired Kit JAZZ BASS (wiring Harness, Assembly)
The circuit corresponds to the standard model since 1963. Replacing the original wiring is also worthwhile with this kit, read below.
Details:
- ARTY's WAXED PAPER SKIN Capacitor 50's Vintage Style
- CTS 250K or 500k Audio Taper Pot, 1/4" solid shaft, 3/8" thread
- SWITCHCRAFT 1/4" Mono Audio Jack
- Cloth-covered Waxed Pushback 22 AWG Vintage Wire
- Reinforced Ground Connection between the Potentiometers, also for easier installation
- Stabilized insulated socket contacts
- Easy to understand Wiring Plan
Important information about the potentiometers:
The pots used are solid shaft CTS pots with 6.35 mm shaft
diameter. This corresponds to the original US fender pots. For basses from Asia, Mexico and Europe, mostly 6 mm diameter split shaft pots are used, e.g. also in the Strat models. This means that the buttons may have to be slightly drilled out or replaced, but are usually possible without any problems. Each kit is also optionally
available with split shaft pots of the same quality upon request (please before purchase).
The shipping costs for most EU countries are € 12,-. You can find more information about shipping costs under the link directly below the product costs (inkl. Mwst., zzgl. Versandkosten). If your destination country is not listed here, please contact us to calculate the shipping costs.
If you need help with the checkout form or payment, please don't hestitate to contact us via e-mail. We just need your address and the designation of the desired items. As soon as we have received the above information, we will send you the detailed invoice.
67,00 €
inkl. MwSt, zzgl. Versandkosten
- auf Lager
- Versand binnen 3-5 Werktage
Why a Prewired HArness from Arty's Custom Guitars?
BECAUSE WE ARE ONLY SATISFIED WITH THE BEST.
All our prewired kits have matched pots and caps. This means that we measure all potentiometers and capacitors before installation, select them, and use them according to their values where they
deliver the best possible result in combination with the pickups. This is important because original pots have tolerances of up to +-20%. In extreme cases, a 500k pot can have values of only 400k
or up to 600k ohms. Not infrequently good pickups are replaced unnecessarily, because they sound muddy, weak or thin. In reality, however, the problem is often not due to bad pickups, but simply
to inferior wiring, which mercilessly destroys the actually perfect sound.
We compared enormous quantities of capacitors in interaction with various pickups and thus determined the most suitable tone caps under real conditions. The capacitors are hand-selected HQ film
capacitors with very low tolerance, very similar in design to the originals from the fifties. The vintage paper wax skin gives the caps an additional look. Our capacitors are so close to the
originals of the 50's that nobody will hear a difference.
In all our kits only the best components from well-known manufacturers like CTS, Switchcraft, CRL or Oak Grigsby are used. All kits are carefully manufactured in small quantities and
professionally handcrafted, and delivered to satisfied customers all over the world.